Resetting Harbor Breeze Replacement Remotes

May 3rd 2020

The remote control has been synced to this fan at the factory and the dip switch setting has been switched to 0 in the battery compartment. 

If you have more than one remote control in the room, you need to change the dip switch setting as follows: 

Slide the dip switch to 1 in the battery compartment and switch the power to the fan OFF and then return the power ON and you will then hear the remote receiver make musical sounds indicating that the power is normal.

Within 30 seconds press the Learn button on the back of the transmitter in the battery compartment. 

Your remote and fan should be synchronized. 

To be sure it is working properly, the fan light (if installed) will blink 3 times and remain ON, and it will rotate on High Speed